Hi All Experts,
On my Win 7 PC, I have a twin PCI DVB-T tuner and one USB DVB-T2 (HD). Each time I use the auto scan on Media Center, I reveive 52 channels which are correct for the PCI tuner.
When I scan manually and only use the DVB-T2 tuner, I can now see 114 channels, including HD.
A few months ago, I had the three tuners working together with the HD channels. I retuned and lost them.
What is the trick I am missing to tell WMC to scan each tuner separately?
How do I tell MC to deal with three tuners?
Tuners: PCTV USB Stick and FusionHDTV Dual PCI.
Don't use auto, choose to configure yourself and choose the dvb t2 card first think it chooses that as priority tuner then...
Hi milli260876,
The manual setup only allows me a single tuner setup at a time. When I do the manual setup, the
The steps are Settings-TV Signal-Set Up TV Signal, select Region, Agree and Download the TV Setup Data. Following this, the options on the "TV Signal Detection Result" two tuners instead of three (that's one of the problems).
Then I proceed to select the manual "No, show more options" and then choose the "Let me configure my TV Signal manually". This brings me to the tick boxes where I select one or both the tuners. If I choose both, I get the same results as the auto config. If I choose the second tuner, I then have only one in action and two unused.
How do I go around this?
Many thanks again.